No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Switching IEEE 802.1ag Versions

Switching IEEE 802.1ag Versions

Context

By default, IEEE 802.1ag Standard 802.1ag-2007 is enabled on a device. Perform the following operations on each device where IEEE Draft 7 needs to be used.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    cfm version { draft7 | standard }

    The IEEE 802.1ag version is switched.

    By default, IEEE Standard 802.1ag-2007 is enabled on a device.

    NOTE:

    All the devices in an MA must be enabled with either IEEE 802.1ag Draft 7 or IEEE Standard 802.1ag-2007. Otherwise, these devices cannot exchange CFM packets with each other.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141941

Views: 69727

Downloads: 481

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next