No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How to Determine VRRP Master and Slave Devices?

How to Determine VRRP Master and Slave Devices?

  • The master and slave devices can be specified by setting VRRP priorities. The device of the highest priority functions as the Master device and the device of a lower priority functions as the slave device.

  • If two devices have the same priority, when the two devices are restarted, the device whose state machine enters the Master state first is the Master device. This saves an unnecessary switchover.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141941

Views: 69900

Downloads: 481

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next