No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Are the Precautions for Configuring Multicast BFD?

What Are the Precautions for Configuring Multicast BFD?

The BFD packets sent in multicast mode are untagged.

When a port configured with multicast BFD receives tagged packets, it checks the tag of the packets. If the tag is different from the port's default VLAN ID, the port discards the packets.

To configure multicast BFD on an interface, run the port default vlan command to specify the default VLAN of the interface.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141941

Views: 72164

Downloads: 482

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next