No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the VRRP Version Number

(Optional) Configuring the VRRP Version Number

Context

IPv4 VRRP supports VRRPv2 and VRRPv3. If devices in a VRRP group use different VRRP versions, VRRP Advertisement packets will fail to be forwarded.
  • A VRRPv2 group can send and receive only VRRPv2 Advertisement packets, and discards received VRRPv3 Advertisement packets.
  • A VRRPv3 group can send and receive both VRRPv2 and VRRPv3 Advertisement packets. You can configure the mode in which VRRPv3 Advertisement packets are sent as v2-only, v3-only, or v2v3-both.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    vrrp version { v2 | v3 }

    The VRRP version number is set.

    By default, VRRPv2 is used.

    If VRRPv3 is used, run the vrrp version-3 send-packet-mode { v2-only | v3-only | v2v3-both } command to set the mode in which VRRPv3 Advertisement packets are sent. The default mode is v3-only.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141941

Views: 61727

Downloads: 479

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next