No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Description for a BFD Session

Configuring the Description for a BFD Session

Context

To differentiate BFD sessions, configure the description for BFD sessions.

NOTE:

The description (BFD session view) command is valid for only static BFD sessions, and is invalid for dynamic BFD sessions and BFD sessions with automatically negotiated parameters.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    bfd session-name

    The BFD session view is displayed.

  3. Run:

    description description

    The description of the BFD session is configured.

    By default, the description of a BFD session is empty.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141941

Views: 72242

Downloads: 482

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next