No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to VRRP

Introduction to VRRP

Definition

The Virtual Router Redundancy Protocol (VRRP) groups multiple routing devices into a virtual router and uses the virtual gateway device's IP address as the default gateway address. When the gateway fails, VRRP selects a new gateway to transmit service traffic to ensure reliable communication.

Purpose

As networks rapidly develop and applications become diversified, various value-added services such as Internet Protocol television (IPTV) and video conferencing services are widely deployed. Demands for network infrastructure reliability are increasing, especially for nonstop service transmission.

Generally, all hosts on the same network segment are configured with the same default route with the gateway address as the next hop address. The hosts use the default route to send packets to the gateway and the gateway forwards the packets to other network segments. When the gateway fails, hosts with the same default route cannot communicate with external networks. A common method to improve network reliability is to configure multiple egress gateways. However, route selection between the gateways becomes an issue.

VRRP resolves this issue. VRRP virtualizes multiple routing devices into a virtual router without changing the networking. The virtual router IP address is configured as the default gateway address. When the gateway fails, VRRP selects a new gateway to transmit service traffic to ensure reliable communication.

Benefits

On a multicast or broadcast LAN, such as Ethernet, VRRP provides a highly reliable link when the gateway fails, without modifying host and gateway configurations. VRRP prevents network interruptions when a single link fails.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141941

Views: 91719

Downloads: 513

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next