No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VRRP6 Association

Configuring VRRP6 Association

Pre-configuration Tasks

VRRP6 association enables VRRP6 to detect faults in a timely manner and triggers an active/standby switchover when the master or the uplink of the master becomes faulty. VRRP6 association optimizes VRRP6 switchover and enhances network reliability.

Before configuring VRRP6 association, perform the task of Configuring Basic Functions of an IPv6 VRRP Group.

Updated: 2019-12-28

Document ID: EDOC1000141941

Views: 110726

Downloads: 529

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next