No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Prerequisites

The configurations of the route reflection for BGP VPNv6 function are complete.

Procedure

  • Run the display bgp vpnv6 all peer [ [ ipv4-address ] verbose ] command to check information about the BGP VPNv6 peer on the RR or the Client PEs.
  • Run the display bgp vpnv6 all routing-table peer ipv4-address { advertised-routes | received-routes } command to check information about the VPNv6 routes received from the peer or the IPv6 VPN routes advertised to the peer on the RR or the Client PEs.
  • Run the display bgp vpnv6 all group [ group-name ] command to check information about the IPv6 VPN peer group on the RR.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141944

Views: 72862

Downloads: 507

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next