No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview

Overview

Definition

Virtual leased line (VLL) technology, also called Virtual Private Wire Service (VPWS), emulates leased lines on an IP network to provide a low-cost asymmetrical digital data network (DDN) service. It is a point-to-point (P2P) Layer 2 tunneling technology, based on Multiprotocol Label Switching (MPLS), which allows the exchange of data packets between networks using different media. Figure 5-1 shows an example of VLL networking.

Figure 5-1  VLL networking

Purpose

  • There are many different types of Layer 2 networks: Ethernet, Asynchronous Transfer Mode (ATM), Frame Relay (FR), and High-Level Data Link Control (HDLC). However, because they use different protocols, they are isolated from one another.
  • More Ethernet connections are required between large cities and remote areas. Traditionally, service providers use direct-leased lines or set up Layer 2 tunnels between two areas, but this is expensive and can be difficult to maintain and extend.

Service providers need a solution to these problems. VLL technology establishes a compatible Layer 2 switching network that is cost effective and is easy to maintain and extend. Based on MPLS technology, VLL allows multiple customers to share one leased line and creates an exclusive virtual channel for each customer on the shared line. On an Ethernet network, sites in different cities can communicate over a P2P VLL connection on an MPLS network, just like communicating within a virtual local area network (VLAN).

Since Ethernet has replaced most other Layer 2 networks, VLL is rarely used for communication between different networks, but is widely used for Layer 2 transparent transmission.

VLL is an MPLS-based Layer 2 virtual private network (L2VPN) technology to directly transmit Layer 2 data. VLL establishes P2P VPN tunnels for P2P communication. However, P2P service eventually became insufficient to meet user requirements, and in response a point-to-multipoint (P2MP) technology, called Virtual Private LAN Service (VPLS) was developed. For details about VPLS, see VPLS Configuration.

Benefits

VLL brings the following benefits:
  • Extended network functions and service capabilities for carriers

    Carriers can use VLL and enhanced MPLS technologies, such as traffic engineering (TE) and quality of service (QoS), to provide users with differentiated services, meeting user's individual needs.

  • Interconnection between networks using different Layer 2 protocols

    VLL allows an Internet service provider (ISP) network to provide connections and switching services using multiple Layer 2 protocols.

  • Higher scalability

    VLL uses label stacks to identify multiple virtual circuits (VCs) in one label switched path (LSP). Therefore, the provider (P) device only needs to maintain information about one LSP, improving system scalability.

  • Smaller maintenance workload

    VLL establishes VPNs in large-scale enterprises with large sites and many routes. P devices on the ISP networks only need to forward packets over tunnels on the public network according to MPLS labels and do not need to maintain any Layer 2 information.

  • Smooth network upgrade

    VLL is transparent to users, so carriers can smoothly upgrade their traditional L2VPN networks to MPLS L2VPN networks, without affecting configurations on customer networks. The network upgrade does not affect user services, except for a brief period of data loss during network migration.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141944

Views: 72119

Downloads: 507

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next