No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Adjusting BFD Parameters

(Optional) Adjusting BFD Parameters


BFD parameters include the local detection multiplier, minimum interval for receiving BFD packets, and minimum interval for sending BFD packets. Perform the following operations on the two PEs of the PW.


  1. Run:


    The system view is displayed.

  2. Run:

    pw-template pw-template-name

    The PW template is displayed.

  3. Run:

    bfd-detect [ detect-multiplier multiplier | min-rx-interval rx-interval | min-tx-interval tx-interval ] *

    BFD parameters are set.

Updated: 2019-08-21

Document ID: EDOC1000141944

Views: 111809

Downloads: 588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next