No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VPN GR Helper

Configuring VPN GR Helper

Context

In Graceful Restart (GR) process, two roles are defined according to their functions, that is, GR restarter and GR helper.
  • GR restarter: performs active/standby control board switchover or the system upgrade.
  • GR helper: helps the GR restarter to implement uninterrupted service forwarding.

VPN GR is the collection of GR capabilities of various protocols running on devices on VPN networks. You need to configure IGP GR helper, MPLS LDP GR helper, MPLS TE GR helper, or BGP GR helper on neighboring devices of the GR restarter based on the related protocol running on the GR restarter.

Configure specified VPN GR on the PE, CE, and P as follows:
  • Configure IGP GR helper, MPLS LDP GR helper, MPLS TE GR helper, or BGP GR helper on the PE device.
  • Configure MPLS LDP GR helper, MPLS TE GR helper, or IGP GR helper on the P device.
  • Configure IGP GR helper or BGP GR helper on the CE device.
  • If a VPN spans multiple ASs, you must configure IGP GR helper, MPLS LDP GR helper, MPLS TE GR helper, or BGP GR helper on the ASBR.

Pre-configuration Tasks

Before configuring VPN GR helper, complete the following tasks:

Procedure

  • Configure IS-IS GR helper or OSPF GR helper.

    • For details about how to configure IS-IS GR helper, see Enabling IS-IS GR in "IPv4 IS-IS Configuration" in the S1720, S2700, S5700, and S6720 V200R010C00 Configuration Guide - IP Unicast Routing.

    • For details about how to configure OSPF GR helper, see (Optional) Configuring GR Session Parameters on the Helper in "OSPF Configuration" in the S1720, S2700, S5700, and S6720 V200R010C00 Configuration Guide - IP Unicast Routing.

  • Configure BGP GR helper.

    • For details about how to configure BGP GR helper, see Configuring BGP GR in "BGP Configuration" in the S1720, S2700, S5700, and S6720 V200R010C00 Configuration Guide - IP Unicast Routing.

  • Configure MPLS LDP GR helper or MPLS TE GR helper.

    • For details about how to configure MPLS LDP GR helper, see Configuring LDP GR in "MPLS LDP Configuration" in the S1720, S2700, S5700, and S6720 V200R010C00 Configuration Guide - MPLS.
    • For details about how to configure MPLS TE GR helper, see Configuring RSVP GR in "MPLS TE Configuration" in the S1720, S2700, S5700, and S6720 V200R010C00 Configuration Guide - MPLS.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141944

Views: 103418

Downloads: 572

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next