No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling or Disabling VSI

Enabling or Disabling VSI

Context

Sometimes, to halt services, you can disable a VSI temporarily, and then add, cancel, or adjust VSI functions.

Procedure

  • Enable VSI
    1. Run the system-view command to enter the system view.
    2. Run the vsi vsi-name command to enter the vsi view.
    3. Run the undo shutdown command to enable VSI.
  • Disable VSI
    1. Run the system-view command to enter the system view.
    2. Run the vsi vsi-name command to enter the vsi view.
    3. Run the shutdown command to check disable VSI.

      The shutdown command affects the PW connection. The AC is Down, and the Layer 2 forwarding table is deleted.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141944

Views: 104315

Downloads: 577

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next