No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the RR to Establish MP IBGP Connections with the Client PEs

Configuring the RR to Establish MP IBGP Connections with the Client PEs

Context

Choose one of the following schemes to configure the RR.

Procedure

  • Configuring the RR to establish MP IBGP connections with the peer group

    Add all the client PEs to the peer group and establish MP-IBGP connections with the peer group.

    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      bgp { as-number-plain | as-number-dot }

      The BGP view is displayed.

    3. Run:

      group group-name [ internal ]

      An IBGP peer group is created.

    4. Run:

      peer group-name connect-interface interface-type interface-number

      The interface is specified as an interface to establish the TCP connection.

    5. Run:

      ipv4-family vpnv4

      The BGP VPNv4 address family view is displayed.

    6. Run:

      peer group-name enable

      The capability of exchanging IPv4 VPN routes between the RR and the peer group is enabled.

      By default, only the peer in the BGP IPv4 unicast address family view is automatically enabled.

    7. Run:

      peer ip-address group group-name

      The peer is added to the peer group.

  • Configuring the RR to establish an MP IBGP connection with each client PE

    Repeat the following steps on the RR to establish an MP IBGP connection with each client PE.

    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      bgp { as-number-plain | as-number-dot }

      The BGP view is displayed.

    3. Run:

      peer ipv4-address as-number as-number

      The client PE is specified as the BGP peer.

    4. Run:

      peer ipv4-address connect-interface interface-type interface-number

      The interface is specified as an interface to establish the TCP connection.

    5. Run:

      ipv4-family vpnv4

      The BGP VPNv4 address family view is displayed.

    6. Run:

      peer ipv4-address enable

      The capability of exchanging VPNv4 routes between the RR and the client PE is enabled.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141944

Views: 110031

Downloads: 588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next