No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - VPN
S1720, S2700, S5700, and S6720 V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Dynamic BFD for PWs

Configuring Dynamic BFD for PWs

Pre-configuration Tasks

When configuring dynamic BFD for PWs, you do not need to specify BFD parameters. Dynamic BFD for PWs shortens link detection, reduces configuration workload, and triggers fast switching of the upper-layer application. This configuration applies to large-scale networks.

Before configuring dynamic BFD for PWs, complete the following tasks:

  • Configure basic MPLS functions.

  • Configure a PW.

Configuration Process

Adjusting BFD parameters is optional, and other procedures are mandatory and must be performed in sequence.

Updated: 2019-12-28

Document ID: EDOC1000141944

Views: 161682

Downloads: 649

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next