No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Attack Detection and Dynamic Blacklist

Verifying the Configuration of Attack Detection and Dynamic Blacklist

Context

After the WIDS configuration is complete, you can check WIDS profiles on the device, including their configuration and profile reference information, WIDS device attacking device list and dynamic blacklist.

Procedure

  • Run the display wlan ids attack-detected { all | flood | spoof | wapi-psk | weak-iv | wep-share-key | wpa-psk | wpa2-psk | mac-address mac-address } command to check information about the detected attacking devices.
  • Run the display wlan ids attack-history { all | flood | spoof | wapi-psk | weak-iv | wep-share-key | wpa-psk | wpa2-psk | mac-address mac-address } command to check historical records of the detected attacking devices.
  • Run the display wlan ids attack-detected statistics command to check statistics on the detected attacks.
  • Run the display wlan dynamic-blacklist { all | ap-id ap-id | ap-name ap-name | mac-address mac-address } command to check attacking devices added to the dynamic blacklist.
  • Run the display station dynamic-blacklist { ap-id ap-id | ap-name ap-name } command to check the dynamic blacklist.
Translation
Download
Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 203309

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next