No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Information About BLE Devices Used for Bluetooth Location

Checking Information About BLE Devices Used for Bluetooth Location

Procedure

  • Run the display wlan ble site-info { all | mac-address mac-address } command to check information about BLE devices scanned and obtained by an AP's built-in Bluetooth module.
  • Run the display wlan ble monitoring-list command to check BLE devices that have been added to the monitoring list.
Translation
Download
Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 221803

Downloads: 535

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next