No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Device to Allow High Inrush Current During Power-On

Configuring the Device to Allow High Inrush Current During Power-On


High inrush current is generated when a non-standard PD is powered on. In this case, the AP cuts off the power of the PD to protect itself. If the AP is required to provide power to the PD, the PSE must allow high inrush current.
If high inrush current is allowed, the self-protection function of the AP is disabled. This may damage components of the PD.


  1. Run:


    The system view is displayed.

  2. Run:


    The WLAN view is displayed.

  3. Run the ap-system-profile name profile-name command to create an AP system profile and enter the profile view.

    By default, the system provides the AP system profile default.

  4. Run the poe high-inrush enable command to configure the AP to allow high inrush current during power-on.

    By default, interfaces do not allow high inrush current during power-on.

    This command takes effect only on the AP7050DN-E, AP4050DN-E, AP4050DN-HD, AD9430DN-24, and AD9430DN-12.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 202865

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next