No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reference Relationships Between WLAN Profiles

Reference Relationships Between WLAN Profiles

Various profiles are designed based on different functions and features of WLAN networks to help users configure and maintain functions of WLAN networks. These profiles are called WLAN profiles. Figure 3-1 shows the referencing relationships between WLAN profiles. By getting to know the referencing relationships, users can easily grasp the configuration roadmap of WLAN profiles and complete their configurations.

As shown in Figure 3-1, the following profiles can be bound to the AP group and AP: radio profile, VAP profile, Location profile, regulatory domain profile, AP system profile, WIDS profile, AP wired port profile, WDS profile, and Mesh profile. Some of the listed profiles can further reference other profiles, for example, the radio profile can reference an air scan profile and an RRM profile.

Figure 3-1  Reference relationships between WLAN profiles
AP Group and AP
  • The profiles marked with * can be configured as default profiles.

  • An AP radio can directly reference some profiles, including the radio profile, VAP profile, WDS profile, WDS whitelist profile, Mesh profile, and Mesh whitelist profile.

  • The IoT profile and serial profile are directly referenced in the IoT card interface view and are not displayed.

WLAN profiles are designed to facilitate configuration and maintenance of WLAN functions. When configuring WLAN service functions, users need to configure parameters in matching WLAN profiles. After completing the configurations, they need to bind the profiles to upper-level profiles, AP groups, or APs, and manually deliver the configurations. After that, the configured functions take effect on the APs.

  • If a WLAN profile is bound to an upper-level profile, this upper-level profile should be bound to an AP group or AP.

For example, to configure air interface scan parameters, you can configure the parameters in an air scan profile and bind the air scan profile to a radio profile, which is then bound to an AP group or AP, as shown in Figure 3-1. After you manually deliver the configurations, the configurations in the air scan profile take effect on the APs. If referencing relationships between profiles are set in advance, and parameters are configured in the air scan profile, the configurations in the profile take effect after you manually deliver them.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 202341

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next