No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP Wired Port Profile

AP Wired Port Profile


An AP wired port profile provides configurations of AP wired ports. AP wired port link profiles can be bound to AP wired port profiles. AP wired port link profiles are used to configure link-layer parameters of AP wired ports.

The following configurations are performed in an AP wired port profile:
  • Add an AP's wired port to an Eth-Trunk.
  • Configure STP, working mode, and DHCP trusted port on an AP's wired port.
  • Configure STA address learning, IP source guard, and dynamic ARP probing on an AP's wired port.
  • Specify the maximum broadcast, multicast, and unknown unicast traffic allowed by an AP's wired port.
  • Associate STP with the error-triggered shutdown function on an AP's wired port.
  • Configure IGMP Snooping for an AP's wired port.

CLI-based Procedure

For details, see Managing an AP's Wired Interface.
Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 216616

Downloads: 533

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next