No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Mesh Whitelist

Configuring a Mesh Whitelist


To prevent a vehicle-mounted AP from connecting to trackside APs along a different track from the vehicle-mounted AP, add MAC addresses of all trackside APs along the local track to the Mesh whitelist of the vehicle-mounted AP.


  1. Run:


    The system view is displayed.

  2. Run:


    The WLAN view is displayed.

  3. Run:

    mesh-whitelist-profile name whitelist-name

    A Mesh whitelist profile is created, and the Mesh whitelist profile view is displayed.

    By default, no Mesh whitelist profile is available in the system.

  4. Run:

    peer-ap mac mac-address

    MAC addresses of neighboring APs that are allowed to connect to an AP are added to the Mesh whitelist profile.

    By default, no MAC address of a neighboring AP is added to a Mesh whitelist profile.


    When configuring vehicle-ground fast link handover, add MAC addresses of trackside APs allowed to connect to a vehicle-mounted AP to a whitelist.

  5. Run:


    Return to the WLAN view.

  6. Run:


    Return to the system view.

  7. Run:

    interface wlan-radio wlan-radio-number

    The radio interface view is displayed.

  8. Run:

    mesh-whitelist-profile whitelist-name

    The Mesh whitelist profile is bound to the AP radio.

    By default, no Mesh whitelist profile is bound to an AP radio.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 200416

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next