No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Authentication Profile

Authentication Profile


NAC implements access control on users. To facilitate NAC function configuration, the device uses authentication profiles to uniformly manage NAC configuration. You can configure parameters in an authentication profile to provide different access control modes for users. For example, you can configure the access profile bound to the authentication profile to determine the authentication mode for the authentication profile. The device then uses the authentication mode to authenticate users on the interface or VAP profile to which the authentication profile is applied.

CLI-based Procedure

For the configuration, see Configuring an Authentication Profile.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 204050

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next