No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking STA Running Statistics

Checking STA Running Statistics


After STAs successfully associate with an AP, you can run the following commands in any view to monitor the STA running status.


  • Run the display station { ap-group ap-group-name | ap-name ap-name | ap-id ap-id | ssid ssid | sta-mac sta-mac-address | vlan vlan-id | all } command to check STA access information.
  • Run the display station statistics [ sta-mac sta-mac-address | ap-name ap-name | ap-id ap-id ] command to check STA statistics.
  • Run the display ap sta-signal strength { ap-name ap-name | ap-id ap-id } [ radio radio-id ] command to check the average signal strength of STAs on an AP.
Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 203010

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next