No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Signal Coverage Models of Vehicle-Ground Fast Link Handover

Signal Coverage Models of Vehicle-Ground Fast Link Handover

A train has a fixed forward direction. Therefore, vehicle-ground APs all use directional antennas to enhance signal strength and mitigate interference. In Figure 15-2, the antenna on the working vehicle-mounted AP faces the forward direction of the train. Antennas on trackside APs face the opposite direction, with a certain angle deviation. In this way, the vehicle-mounted AP always moves within the optimal coverage area of the trackside APs.

  • If only the vehicle-mounted AP in the rear of the train works, the antennas of trackside APs should tilt in the forward direction of the train to achieve optimal signal coverage.
  • If both the vehicle-mounted APs in the front and rear of the train work, use dual-band APs (such as dual-5G AP8130DNs) as trackside APs. To achieve optimal signal coverage, install two directional antennas on each trackside AP, with one antenna tilting in the forward direction of the train and the other in the opposite direction.

Wind resistance in rail tunnels may affect coverage of AP antennas. When a train passes through a tunnel at high speed, a turbulent airflow is induced. Strong turbulent airflows may cause angle offset of antennas. Wind-resistant Yagi antennas with small cross-sectional areas can solve this problem. Huawei's vehicle-ground communication network uses external Yagi antennas on trackside APs and external Yagi or panel antennas on vehicle-mounted APs.

Figure 15-2  Signal coverage in vehicle-ground communications

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 201227

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next