No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the AP Group to Which APs Belong

Modifying the AP Group to Which APs Belong


If the current AP group is not applicable to an AP or the AP is added to an incorrect AP group, you can modify configurations to add the AP to a new AP group.

Modifying the AP group results in AP restart and service interruption. Exercise caution when performing this operation.

You can also modify AP groups in the AP provisioning view. For details, see Configuring Online Parameters.


  1. Run:


    The system view is displayed.

  2. Run:


    The WLAN view is displayed.

  3. Run:

    ap-regroup { ap-name ap-name | ap-id ap-id } new-group new-group-name

    An AP is added to a new AP group.


    The AP group to which an AP is added must have been created using the ap-group name group-name command.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 220618

Downloads: 535

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next