No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Security Profile

Configuring a Security Profile


You need to configure a security profile and a security policy for the Mesh to ensure security. The WPA2+PSK+AES security policy is recommended for a Mesh security profile. For details about WPA2, PSK, and AES, see WLAN Security Configuration.

By default, the system provides the Mesh profile default. Both the default Mesh profile default and a self-defined Mesh profile have the security profile default-mesh referenced by default. In the security profile default-mesh, the security policy is set to WPA2+PSK+AES and the security key to huawei_secmesh. If the default security profile default-mesh is used, you are advised to change the security key of the profile to ensure security.


  1. Run:


    The system view is displayed.

  2. Run:


    The WLAN view is displayed.

  3. Run:

    security-profile name profile-name

    A security profile is created, and the security profile view is displayed.

    By default, security profiles default, default-wds, and default-mesh are available in the system.

  4. Run:

    security wpa2 psk { pass-phrase | hex } key-value aes

    A security policy is configured for the security profile.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 200974

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next