No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the WIDS Configuration

Verifying the WIDS Configuration


After the WIDS configuration is complete, you can check WIDS profiles on the device, including their configuration and profile reference information, WIDS device attacking device list and dynamic blacklist.


  • Run the display wids-profile { all | name profile-name } command to check information about the WIDS profile.
  • Run the display references wids-whitelist-profile name profile-name command to check reference information about the WIDS whitelist profile.
  • Run the display ap-system-profile { all | name profile-name } command to check the configuration of the AP system profile.
Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 202801

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next