No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
General Precautions for WLAN

General Precautions for WLAN

  • Only the S5720HI supports WLAN-AC service.

  • Before configurations in this chapter, set the NAC mode to unified (default). To check the current NAC mode, run the display authentication mode command.

  • Mobility of wireless users varies depending on scenarios. For example, users move frequently in the wireless city or start/end of a class, which has high impact on device performance. To ensure wireless user experience, properly control the number of users. For the optimal deployment scale in major wireless scenarios, see the configuration guide in the campus solution documentation. For deployment precautions, see Deployment Notes.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 201099

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next