No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
STA Blacklist Profile

STA Blacklist Profile


A STA blacklist profile contains MAC addresses of wireless terminals forbidden to connect to the WLAN. To forbid some STAs to connect to the WLAN, configure a STA blacklist profile and apply the STA blacklist profile to an AP system profile or a VAP profile.

The effective scope of the STA blacklist profile differs according to the profiles to which it is applied.
  • AP system profile: The STA blacklist profile takes effect based on the AP. APs using the AP system profile will use the STA blacklist profile. The STA blacklist profile takes effect on all STAs connected to the APs (all VAPs).
  • VAP profile: The STA blacklist profile takes effect based on the VAP. If the STA blacklist profile is applied to an AP, the STA blacklist profile applies only to STAs connected to the corresponding VAPs.

CLI-based Procedure

For the detailed configuration, see Configuring a STA Blacklist Profile.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 201636

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next