No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Radio Profile

Radio Profile


Radio profiles are used to optimize radio parameters, and control the in-service channel switching function.

Radio profiles are divided into 2G and 5G radio profiles. 2G and 5G radio profiles apply to 2.4 GHz and 5 GHz radios respectively. The differences between configurations of 2G and 5G radio profiles are as follows:
  • 2G radio profiles allow you to configure the 802.11bg basic rate set and supported rate set.
  • 5G radio profiles allow you to configure the 802.11a basic rate set and supported rate set, and perform 802.11ac-related configurations.
Radio profiles can reference air scan profiles and RRM profiles.
  • Air scan profiles are designed for radio calibration, spectrum analysis, location, and WIDS data analysis. APs periodically scan radio signals in their surrounding environment and report the collected information to ACs or servers.
  • RRM profiles are designed to maintain optimal radio resource utilization. They enable APs to check the surrounding radio environment, dynamically adjust working channels and transmit power, and evenly distribute access users. This function helps adjust radio coverage, reduce radio signal interference, and enable a wireless network to quickly adapt to changes in the radio environment. With the radio resource management function, the wireless network can provide high service quality for wireless users.

CLI-based Procedure

For details, see Configuring a Radio.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 201028

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next