No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP Wired Port Link Profile

AP Wired Port Link Profile


An AP wired port link profile provides link layer configurations on an AP's wired port.

The following configurations are performed in an AP wired port link profile:
  • Enable or disable an AP's wired port.

    Enable an AP's wired port before using the port. Disable the AP's wired port when a user connected to the AP's wired port attacks the network.

  • Configure LLDP and the types of advertise TLVs on an AP's wired port.

    You can obtain the network topology of an AP through LLDP.

  • Configure PoE for an AP's wired port.

    Some APs can function as PSE devices to supply PoE power for PDs. Configure PoE for an AP's wired port, so that the AP can provide PDs with PoE power through this port.

  • Configure the alarm function for CRC errors on an AP's wired port.

CLI-based Procedure

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 202061

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next