No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring ACL-based Priority Remarking

Configuring ACL-based Priority Remarking


By configuring ACL-based priority remarking, the device remarks the priorities of wireless packets matching ACL rules to provide differentiated services.

Pre-configuration Tasks

Before configuring ACL-based priority remarking, complete the following tasks:


  1. Run:


    The system view is displayed.

  2. Run:


    The WLAN view is displayed.

  3. Run:

    traffic-profile name profile-name

    A traffic profile is created and the traffic profile view is displayed.

    By default, the system provides the traffic profile default.

  4. Run the traffic-remark { inbound | outbound } ipv4 acl { acl-number | name acl-name } { dot11e dot11e-value | dscp dscp-value } to configure ACL-based priority remarking in the traffic profile.

    By default, ACL-based priority re-marking is not configured in a traffic profile.

    The traffic-remark command can reference a numbered ACL rule that is not configured. You can configure the referenced ACL rule after running this command.

    You can configure priority re-marking based on one ACL only in one direction. To change the ACL referenced by the traffic-remark command, run the traffic-remark command to override the original configuration of ACL-based priority re-marking.

  5. Run:


    Return to the WLAN view.

  6. Run:

    vap-profile name profile-name

    The VAP profile view is displayed.

  7. Run:

    traffic-profile profile-name

    The traffic profile is bound to the VAP profile.

    By default, the traffic profile default is bound to a VAP profile.

  8. Run:


    Return to the WLAN view.

  9. Run:

    commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 202727

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next