No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ACL-based Packet Filtering

ACL-based Packet Filtering

A device with an ACL-based simplified traffic policy can match packet characteristics with ACLs, and provide the same QoS for packets that match ACL rules. This implements differentiated services.

To control traffic entering a network, configure an ACL to match information such as the source IP address, fragment flag, destination IP address, source port number, and source MAC address. Then, configure an ACL-based simplified traffic policy so that the device can filter packets that match ACL rules.

Compared with a traffic policy based on traffic classifiers, an ACL-based simplified traffic policy is easy to configure because there is no need to independently configure a traffic classifier, traffic behavior, or traffic policy. However, an ACL-based simplified traffic policy defines less matching rules than a traffic policy based on traffic classifiers.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 201090

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next