No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VAP Profile

VAP Profile


After parameters in a VAP profile are configured, and the VAP profile is bound to an AP group or AP, virtual access points (VAPs) are created on APs. VAPs provide wireless access services for STAs. You can configure parameters in the VAP profile to enable APs to provide different wireless services.

A VAP profile can reference the following profiles:
  • SSID profile: used to configure SSIDs of WLANs. In the profile, you can also disable access of non-HT STAs and configure the association aging time of STAs and delivery traffic indication message (DTIM) interval. For details, see Configuring an SSID Profile.
  • Security profile: used to configure security policies of WLANs, including policies for authentication and encryption of STAs. Security policies include open system authentication, WEP, WPA/WPA2-PSK, WPA/WPA2-802.1X, WAPI-PSK, and WAPI-certificate. For details, see Security Policy Configuration.
  • Traffic profile: used to configure priority mapping and traffic policing functions of WLANs. After the WMM function is enabled on the STA and AP, the priority mapping function allows you to configure methods for mapping upstream priorities of packets, upstream tunnel priorities, and downstream priorities. The traffic policing function limits packet sending rates of wireless STAs. For details, see Configuring Priority Mapping and Configuring Traffic Policing.
  • Authentication profile: used to manage network admission control (NAC) configurations. You can bind access profiles (including the 802.1X access profile, MAC access profile, and Portal access profile) to authentication profiles to determine configurations of the access protocols. After the authentication profile configuration is complete, bind it to an interface or VAP profile to authenticate and control access users. For details, see NAC Configuration (Unified Mode).

CLI-based Procedure

For details on how to configure a VAP profile, see "Configuring a VAP" in the Configuration-WLAN Service Configuration Guide.

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 201105

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next