No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Typical Application of Uninterrupted AP Operation After CAPWAP Link Disconnection

Typical Application of Uninterrupted AP Operation After CAPWAP Link Disconnection

As shown in Figure 4-32, to reduce management and maintenance costs, some small- and medium-sized enterprises deploy the AC at the headquarters to manage the APs and STAs in branches. In direct forwarding mode, service holding upon CAPWAP link disconnection is configured. After the CAPWAP link between the AP and AC is broken, online branch users can access local network resources (such as the local servers), and new branch users can still access the WLAN to obtain network resources.

Figure 4-32  Uninterrupted AP operation after CAPWAP link disconnection

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 202975

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next