No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP Provisioning Profile

AP Provisioning Profile


To facilitate maintenance and management, an AP provisioning profile is designed so that you can run commands on a Fit AP after logging in to the Fit AP. You can also configure parameters in an AP provisioning profile and manually deliver configurations to specified APs or AP groups.

Parameters in an AP provisioning profile are configured for an AP to go online, including
  • the AP name, group to which an AP belongs, mode of obtaining an IP address, static IP address, gateway address, and AC IP address list.
  • Configure the running mode of the AP. Set the running mode of the AP to switch between the Fat AP and cloud AP modes.
Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 202334

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next