No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Security Policy

Security Policy

Commonly Used Security Policy for Households and SOHO Networks

Households and SOHO networks do not require high security. They usually use the WPA/WPA2 personal edition and do not require an authentication server.

Commonly Used Security for Enterprise Networks

Enterprise networks require high security. They usually use the 802.1X-based WPA/WPA2 enterprise edition and deploy an authentication server.

Commonly Used Security Policy for Carrier Networks

Besides WEP, WPA/WPA2, and WAPI that are specific to wireless users, carriers can combine WLAN security policies with port authentication to enhance security of wireless users. Port authentication methods include 802.1X authentication, MAC address authentication, and Portal authentication. For details about the authentication methods, see NAC Configuration (Unified Mode).

As shown in Figure 11-9, a carrier WLAN network usually uses WEP (no authentication, no encryption) and Portal authentication. When a STA attempts to connect to wireless network, the AC pushes the Portal authentication web page to the user. The user must enter the user name and password on the displayed web page. If the user is successfully authenticated by the RADIUS server, the user can connect to the Internet wirelessly.

Figure 11-9  WEP+Portal authentication

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 202390

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next