No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S5720HI V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of WLAN QoS Configuration Tasks

Summary of WLAN QoS Configuration Tasks

After basic WLAN service configurations are complete, APs can go online and STAs can access the wireless network. In addition to specific WLAN QoS policies, you can also configure other WLAN QoS policies according to the reference sections provided in the following table.

Table 9-3  WLAN QoS configuration tasks




Configure WMM

You can configure radio profiles and SSID profiles to provide different capabilities for different services on STAs or APs to compete for channels to determine the quality of services.

Configuring WMM

Configure Priority Mapping

You can configure priority mapping to distinguish data priority and ensure that data of high-priority users is transmitted first.

Configuring Priority Mapping

Configure Traffic Policing

You can configure traffic policing to limit the STA transmission rate or AP forwarding rate, which prevents network congestion.

Configuring Traffic Policing

Configure Airtime Scheduling

You can configure airtime scheduling to assign users on the same radio with equal channel occupation time.

Configuring Airtime Fair Scheduling

Configure ACL-based Packet Filtering

By configuring ACL-based packet filtering, the device permits or rejects packets matching ACL rules to control network traffic.

Configuring ACL-based Packet Filtering

Configure ACL-based Priority Remarking

By configuring ACL-based priority remarking, the device remarks the priorities of wireless packets matching ACL rules to provide differentiated services.

Configuring ACL-based Priority Remarking

Updated: 2019-12-28

Document ID: EDOC1000141952

Views: 203259

Downloads: 522

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next