No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FM_1. hwAlarmStorm

FM_1. hwAlarmStorm


FM/4/ALARM_STORM:OID [oid] There are excessive traps, which form a trap storm.

Excessive traps were generated, which caused a trap storm.


Alarm ID Alarm Severity Alarm Type Warning qualityOfServiceAlarm(3)


Name Meaning


Indicates the MIB object ID of the alarm.

Impact on the System

If a trap storm is caused, traps will accumulate and the trap queue will reach full. If such a situation lasts for a long time, the last traps in the queue may fail to be sent.

Possible Causes

The number of traps received by the system at one time reached the upper limit, which caused a trap storm.


  1. Run the display alarm active command to query current alarms.
  2. Record the information about the traps that are reported frequently.
  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 189159

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next