No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE_1.3.6.1.4.1.2011.5.25.195.40.9 hwPoePdDisconnected

POE_1.3.6.1.4.1.2011.5.25.195.40.9 hwPoePdDisconnected

Description

POE/4/PDDISCONNECT: OID [oid] PD disconnected.(IfIndex=[INTEGER], Interface="[OCTET]")

The PD is disconnected from an interface.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.9 Warning communicationsAlarm(2)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
IfIndex Indicates the interface index.
Interface Indicates the interface name.

Impact on the System

The PD is unavailable and services are not affected.

Possible Causes

A valid PD is removed.

Procedure

  1. Check whether the PD needs to be removed.

    If so, the alarm handling ends.

    If not, reinstall the PD.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 191124

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next