No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.4 hwMgmdGmpJoin

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.4 hwMgmdGmpJoin

Description

MGMD/2/JOINGRP:OID [oid] Interface receives an IGMP or MLD Join message. (Interface=[string], InterfaceIndex=[integer], Version=[gauge], SrcStr=[string], GrpStr=[string], HostAddr=[string], InstanceName=[string])

IGMPv1, IGMPv2, or MLDv1 Report messages were received.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.4

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Interface

Indicates the name of the interface that receives the IGMP/MLD Report message.

InterfaceIndex

Indicates the index of the interface that receives the IGMP/MLD Report message.

Version

Indicates the version of the Report message.
  • 1: IGMPv1/MLDv1
  • 2: IGMPv2/MLDv2

SrcStr

Indicates the source address of the IGMP/MLD Report message.

GrpStr

Indicates the group address of the IGMP/MLD Report message.

HostAddr

Indicates the IP address of the host that sends the IGMP/MLD Report message.

InstanceName

Indicates the instance name.

Impact on the System

Services will not be affected.

Possible Causes

The function of generating a trap was enabled when an IGMP/MLD Report/Leave message was received. This trap is generated when an IGMPv1, IGMPv2, or MLDv1 Report message was received.

Procedure

  1. This alarm message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 182168

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next