No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1.3.6.1.4.1.2011.5.25.160.3.12 hwMflpQuitVlanResume

L2IFPPI_1.3.6.1.4.1.2011.5.25.160.3.12 hwMflpQuitVlanResume

Description

L2IFPPI/4/MFLPQUITVLANALARMRESUME:OID [oid] (VLAN=[INTEGER]) Interface [OCTET1] has resumed of leaved from VLAN [OCTET2] because MAC move detected.

An interface that had been removed from a VLAN because of MAC address flapping joined the VLAN again.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.160.3.12 Warning environmentalAlarm(6)

Parameters

Name Meaning
oid Indicates the ID of a MIB object.
INTEGER Indicates the VLAN ID.
OCTET1 Indicates the interface name.
OCTET2 Indicates the VLAN from which the interface is removed.

Impact on the System

None

Possible Causes

An interface that had been removed from a VLAN because of MAC address flapping joined the VLAN again.

Procedure

  1. This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 189962

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next