No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BASETRAP_1.3.6.1.4.1.2011.5.25.129.2.1.8 hwEntityCommunicateResume 140312

BASETRAP_1.3.6.1.4.1.2011.5.25.129.2.1.8 hwEntityCommunicateResume 140312

Description

BASETRAP/4/ENTCOMMUNICATERESUME: OID [oid] Communication channel recovered from a failure. (Index=[INTEGER], Severity=[INTEGER], ProbableCause=[INTEGER], EventType=[INTEGER], ContainedIn=[INTEGER], PhysicalName="[OCTET]", RelativeResource="[OCTET]",ReasonDescription="[OCTET]")

An alarm is generated when signals are recovered on the CANbus.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.8 Warning communicationsAlarm(2)

Parameters

Name Meaning
[oid] Indicates the ID of the MIB object.
Index Indicates the index of the entity. The entity in the alarm message is a board.
Severity Indicates the severity level of the alarm.
ProbableCause Indicates the possible causes of the alarm. The codes of the possible causes are as follows:

10: IANAITUPROBABLECAUSE_TRANSMISSIONERROR indicates the transmission error.

EventType Indicates the alarm type. Alarms are classified into the following types:
  • communicationsAlarm (2)
  • qualityOfServiceAlarm (3)
  • processingErrorAlarm (4)
  • equipmentAlarm (5)
  • environmentalAlarm (6)

This alarm is an alarm of the communicationsAlarm type, that is, the alarm on communications errors.

ContainedIn Indicates the parent index of the entity. In the alarm message, this parameter indicates the index of the slot where the board is located.
PhysicalName Indicates the physical name of the entity. For example, the physical name of an LPU is LE01G48SC.
RelativeResource Indicates the name of a component that is associated with the alarm.
ReasonDescription Indicates the description of causes of the alarm.

Impact on the System

None.

Possible Causes

The CANbus is recovered.

Procedure

  1. This is a normal notification and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 184485

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next