No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CSSM_1. hwCssPortConfigureFailed

CSSM_1. hwCssPortConfigureFailed


CSSM/2/CSSCFGINVALID: OID [OID] CSS port configuration failed. Please reset slot[OCTET] and configure the CSS port again.

The MPU failed when a user attempted to configure service ports as physical member ports of a CSS port. The service ports became unavailable.


Alarm ID Alarm Severity Alarm Type Major processingErrorAlarm(4)


Name Meaning
OCTET Indicates the sot ID of the service ports that failed to be configured as physical member ports.

Impact on the System

The service ports cannot be displayed in the system.

Possible Causes

The MPU was removed when the user was configuring the service ports as physical member ports of a CSS port.


  1. Check whether any log was generated when this alarm was generated.

    • If so, go to step 2.
    • If not, go to step 3.

  2. Rectify the fault according to the log.
  3. Reset the card.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 191883

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next