No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1. hwMflpMacAddrResume

L2IFPPI_1. hwMflpMacAddrResume


L2IFPPI/4/MFLPMACRESUME:OID [oid] Loop does not exist in VLAN [INTEGER], MAC Address [OCTET1] resumed, block-time is [GAUGE], the former Interface [OCTET2], the latter Interface [OCTET3], for [OCTET4].

The flapped MAC address was unblocked.


Alarm ID Alarm Severity Alarm Type Warning equipmentAlarm(5)


Name Meaning
oid Indicates the ID of the MIB object.
INTEGER Indicates the VLAN ID.
OCTET1 Indicates the blocked MAC address.
GAUGE Indicates the block time.
OCTET2 Indicates the interface name before MAC address flapping occurs.
OCTET3 Indicates the interface name after MAC address flapping occurs.
OCTET4 Indicates the blocking cause.

Impact on the System


Possible Causes

The blocked MAC address was recovered.


  • This alarm is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 192512

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next