No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EZOP_1. hwEasyOperationClientLost

EZOP_1. hwEasyOperationClientLost


EZOP/4/CLIENTLOST: OID [oid] Easy operation client device lost (ClientId=[INTEGER], HostName="[OCTET]", ClientIp="[OCTET]", ClientMac="[OPAQUE]",ClientEsn="[OCTET]").

A client left the management domain of the Commander.


Alarm ID Alarm Severity Alarm Type Warning equipmentAlarm(5)


Name Meaning
[oid] Indicates the ID of the alarm MIB object.
ClientId Indicates the client ID.
HostName Indicates the host name of the client.
ClientIp Indicates the IP address of the client.
ClientMac Indicates the MAC address of the client
ClientEsn Indicates the ESN of the client.

Impact on the System


Possible Causes

A client left the management domain of the Commander. The Commander does not receive any responses from the client in 2 minutes. In a CSS, change of the system MAC address causes a LOST alarm.


  1. This alarm is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 188966

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next