No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BASETRAP_1. hwEntityResume

BASETRAP_1. hwEntityResume


BASETRAP/4/ENTITYRESUME: OID [oid] Physical entity recovered from a failure. (Index=[INTEGER], Severity=[INTEGER], ProbableCause=[INTEGER] , EventType=[INTEGER], ContainedIn=[INTEGER], PhysicalName="[OCTET]", RelativeResource ="[OCTET]", ReasonDescr="[OCTET]")

The physical entity fault is rectified.


Alarm ID Alarm Severity Alarm Type Warning equipmentAlarm(5)


Name Meaning
OID Indicates the ID of the MIB object.
EntityPhysicalIndex Indicates the physical index.
BaseTrapSeverity Indicates the alarm severity.
BaseTrapProbableCause Indicates the possible causes of the alarm.
BaseTrapEventType Indicates the alarm type.
EntPhysicalContainedIn Indicates the parent index of the entity.
EntPhysicalName Indicates the name of the entity. The value varies with the board type, for example, MPU Board 4, LPU Board 1, and Power Board 24.
RelativeResource Indicates the part related to the alarm.
ReasonDescription Indicates the description of the alarm cause.

Impact on the System


Possible Causes

Cause 1:

The fault of the GE physical interface on the BCM54980 was rectified.

Cause 2:

The fault of the link between the CPU and PCI was rectified.

Cause 3:

The fault of the link between the CPU and forwarding module was rectified.

Cause 4:

The fault of the interface on the BCM88230 was rectified.

Cause 5:

The fault of the EPLD was rectified.

Cause 6:

The fault of the FPGA was rectified.

Cause 7:

The fault of the NP was rectified.

Cause 8:

The fault of the PLL was rectified.

Cause 9:

The fault of the CPLD was rectified.

Cause 10:

The fault of the link between the CPU and PCI/PCIe was rectified.

Cause 11:

The fault of the FE physical interface on the forwarding module was rectified.

Cause 12:

The fault of the XGE physical interface on the BCM8754 was rectified.

Cause 13:

The fault of the fan was rectified.


  1. This alarm message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 182359

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next