No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV3_1.3.6.1.4.1.2011.5.25.147.0.13 hwOspfv3LastAuthKeyExpiry

OSPFV3_1.3.6.1.4.1.2011.5.25.147.0.13 hwOspfv3LastAuthKeyExpiry

Description

OSPFV3/2/LASTAUTHKEYEXPIRY:OID [oid] The last authentication key in keychain has expired. (RouterId=[gauge], IfName=[octet])

The last active key ID in the keychain expired.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.147.0.13 Major processingErrorAlarm(4)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

RouterId

Local router ID with its value as a decimal integer

IfName

Interface name

Impact on the System

The system may be attacked by invalid packets.

Possible Causes

The last active key ID in the keychain expired.

Procedure

  1. Run the display keychain keychain-name [ key-id key-id ] command to check the keychain configuration.

    • If the last active key ID in the keychain expired, go to Step 2.
    • If there are still active key IDs in the keychain, go to Step 3.

  2. Check the Timer Mode field in the keychain configuration.

    • If the value of the Timer Mode field is Periodic, the system automatically prolongs the active period of the key ID.
    • If the value of the Timer Mode field is Absolute, you need to run the keychain command to configure a new keychain.

  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information

None

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 191122

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next