No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L3VPN_1.3.6.1.2.1.10.166.11.0.6 mplsL3VpnNumVrfRouteMaxThreshCleared

L3VPN_1.3.6.1.2.1.10.166.11.0.6 mplsL3VpnNumVrfRouteMaxThreshCleared

Description

L3VPN/2/L3V_TRAP_THRE_CLEARED:OID [oid] The number of routes in the VPN instance fell below the maximum value. (VpnInstanceName=[octet], VPNInstanceRouteCount=[gauge], MaxValue=[gauge])

The number of routes contained by the specified VRF exceeds the maximum allowed value as indicated by mplsVrfMaxRouteThreshold and then falls below this value.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.2.1.10.166.11.0.6

Major

qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

VpnInstanceName

Indicates the name of the VPN.

VPNInstanceRouteCount

Indicates the number of current routes.

MaxValue

Indicates that the maximum value of routes or prefixes.

Impact on the System

The number of private routes or prefixes falls below the maximum value, and routes can be received and sent normally.

Possible Causes

1. The number of VRF routes reached the maximum value, and then it fell below the maximum value.

2. The number of VRF prefixes reached the maximum value, and then it fell below the maximum value.

3. The maximum number of VRF routes increases after the routing-table limit command is run for the VPN instance routing table.

4. The maximum number of VRF route prefixes increases after the prefix limit command is run for the VPN instance routing table.

Procedure

  • This alarm message is informational only, and no action is required.

Related Information

None.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 191753

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next