No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.3.5 hwCardInvalid 135465

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.3.5 hwCardInvalid 135465

Description

ENTITYTRAP/1/CARDINVALID:OID [oid] Card is invalid for some reason. (Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType=[INTEGER], EntityTrapFaultID=[INTEGER])

The CSS card is not installed securely.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.3.5 Critical environmentalAlarm(6)

Parameters

Name Meaning
oid Indicates the ID of a MIB object.
Index Indicates an alarm ID.
EntityPhysicalIndex Indicates the index of the physical entity where the alarm is reported.
PhysicalName Indicates the physical entity name.
EntityTrapEntType Indicates the alarm type.
EntityTrapFaultID Indicates the error code of the alarm.

Impact on the System

The CSS card cannot be registered, which will affect CSS services.

Possible Causes

Cause 1: The CSS card is not installed securely.

Cause 2: The CSS card fails to be initialized.

Procedure

  1. Check whether the CSS card is installed securely.
  2. Ensure that the CSS card is installed securely and then check whether the alarm is cleared.

    • If so, the alarm handling ends.
    • If not, go to step 3.

  3. Replace the CSS card and then check whether the alarm is cleared.

    • If so, the alarm handling ends.
    • If not, collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 181563

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next