No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CSSM_1. hwCssConnectError

CSSM_1. hwCssConnectError


CSSM/2/CSSCONNECTERROR: OID [OID] CSS connection error, [INTEGER1]/[INTEGER2] CSS port [INTEGER3] link to [INTEGER4]/[INTEGER5] port [INTEGER6], this port should link to [INTEGER7]/[INTEGER8] port [INTEGER9].

CSS cable connections are incorrect.


Alarm ID Alarm Severity Alarm Type Major equipmentAlarm(5)


Name Meaning
OID Indicates the ID of a MIB object.
INTEGER1 Indicates chassis ID 1.
INTEGER2 Indicates slot ID 1.
INTEGER3 Indicates port number 1.
INTEGER4 Indicates chassis ID 2.
INTEGER5 Indicates slot ID 2.
INTEGER6 Indicates port number 2.
INTEGER7 Indicates chassis ID 3.
INTEGER8 Indicates slot ID 3.
INTEGER9 Indicates port number 3.

Impact on the System

The CSS cannot be set up.

Possible Causes

The cluster cables are not connected according to the cable connection rule.


  1. Check whether cable connections are correct.

    1. Remove the cable between port [INTEGER1]/[INTEGER2]/0/[INTEGER3] and port [INTEGER4]/[INTEGER5]/0/[INTEGER6].
    2. Connect a cable between port [INTEGER1]/[INTEGER2]/0/[INTEGER3] and port [INTEGER7]/[INTEGER8]/0/[INTEGER9].
    3. Run the display css channel command to check whether this connection exists. If so, the connection is correct, and the alarm will be cleared.
    4. If the alarm persists, go to step 2.

  2. Contact technical support personnel.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 180425

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next